The rubber speed hump is a common traffic facility in our life. It not only reduces the speed of cars in motion but also increases the safety of roadside pedestrians. It is sure to wear and tear, so we can only work on reducing the wear and tear.
There is a small hole in the center of each side of the speed bump, which is the installation hole, and the speed bump is fixed to the road with expansion screws.
So when the vehicle crushes the speed bump the most stressed place is the installation hole, the first part of the tear is also the connection hole.
If you cut corners and use recycled rubber with a lot of low-cost additives, the quality of the material will be greatly reduced and it will tear easily.
To avoid this problem, we must use natural rubber without adding a lot of low-cost additives. During the vulcanization processing of rubber products, a steel plate is added to the inside of the speed bump. The two holes are connected separately, and the expansion screws also pass through the steel plate during installation. This increases the strength of the hole connection. Large and small holes are left on the steel plate for a better combination of steel plate and rubber. Inside plus radial, can strengthen the strength.
1. A rubber speed hump is made of special rubber, which has a certain degree of softness
2. There is no strong bumpy feeling when the vehicle passes through, shock absorption, good shock absorption effect
3. Good pressure resistance
4. Long life span
5. Less wear and tear on the car
6. Less noise
7. Yellow and black, distinctive color, no need to paint again every year
8. Aesthetically pleasing
9. Simple installation
10. Easy maintenance
In general, there are speed bumps at crowded, highway intersections or important special roads. Rubber speed bumps largely reduce the occurrence of accidents at the major traffic junctions, are a new special facility for traffic safety. We are a rubber speed hump supplier, please feel free to contact us if you need us.
